Looking for scsi drivers for NT/DOS for Smart Array 5i

[Daniel Simard]

Good morning all,

I am trying to install Windows NT 4.0 on a Proliant DL g3. When you boot with NT CD, you are supposed to press 'S' during the install to specify additional scsi devices.

I need to find the drivers for Smart Array 5i to allow me to copy them to an A: drive so i can continue with the installation.

Can you help me find those drivers?

[TTr · Accepted solution]

Check out here.
You may want to try the 2000 or 2003 driver since there is nothing under WinNT. Maybe WinNT has builtin support?
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=266599〈=en&cc=us&prodTypeId=329290&prodSeriesId=374803&taskId=135

[wobbe]

I believe the G3 was the last serie that supported NT4 so there should be drivers.
But can't you do a smartstart install with an onder version of the smartstart cdrom.