ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Looking for scsi drivers for NT/DOS for Smart Array 5i

SOLVED
Go to solution
Daniel Simard
Frequent Advisor

Looking for scsi drivers for NT/DOS for Smart Array 5i

Good morning all,

I am trying to install Windows NT 4.0 on a Proliant DL g3. When you boot with NT CD, you are supposed to press 'S' during the install to specify additional scsi devices.

I need to find the drivers for Smart Array 5i to allow me to copy them to an A: drive so i can continue with the installation.

Can you help me find those drivers?
Si tu n'as pas ce que tu aimes, aimes ce que tu as.
2 REPLIES
TTr
Honored Contributor
Solution

Re: Looking for scsi drivers for NT/DOS for Smart Array 5i

Check out here.
You may want to try the 2000 or 2003 driver since there is nothing under WinNT. Maybe WinNT has builtin support?
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=266599〈=en&cc=us&prodTypeId=329290&prodSeriesId=374803&taskId=135
wobbe
Respected Contributor

Re: Looking for scsi drivers for NT/DOS for Smart Array 5i

I believe the G3 was the last serie that supported NT4 so there should be drivers.
But can't you do a smartstart install with an onder version of the smartstart cdrom.