ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Looking for way to enable PXE on add-in NIC on ProLiant server out of WinPE environment

 
Jeff Alexander_
Occasional Contributor

Looking for way to enable PXE on add-in NIC on ProLiant server out of WinPE environment

I have a DL580G7 with 4 additional NC382T NICs that apparently come from the factory with PXE disabled. I need to be able to enable PXE on one of the NICs and add it to the top of the server boot order. I also disable the 4 onboard NICs. I start the process by booting from onboard NIC 1 which then boots into WinPE 3.0 and kicks off a vbscript that utilizes the tools from the SSST. But I have not been able to find a tool that will allow me to enable/disable PXE on an add-in HP NIC that will run out of WinPE.

 

I am really hoping that someone has a solution for this.

 

Thanks,

-Jeff