HPE Community
ProLiant Servers (ML,DL,SL)
1752590 Members
3064 Online
108788 Solutions
New Discussion

MAC Address for NIC3: disabled / Incorrect nic is displayed - in RBSU

 
Peter_280
Occasional Contributor

‎04-01-2007 11:59 PM

‎04-01-2007 11:59 PM

MAC Address for NIC3: disabled / Incorrect nic is displayed - in RBSU

I am having a problem with a BL20p G3 which has one odd configured nic in the bios.

In the general RBSU screen it says:
"MAC Address for NIC3: disabled" where the other three available nics are correctly listing their mac addresses.

In the RBSU "PCI Devices" section the adapter is listed as "Ethernet Network controller". this should be "HPNC7781 Gigabit Server Adapter port x", just like the other three available nics.

As a result Windows is not detecting the nic correctly (exclamation mark in device manager) so the driver has to be installed manually. This is undesireable because we are using automated deployment of our servers.

Any help is appreciated!




0 Kudos
1 REPLY 1
Peter_280
Occasional Contributor

‎04-02-2007 12:30 AM

‎04-02-2007 12:30 AM

Re: MAC Address for NIC3: disabled / Incorrect nic is displayed - in RBSU

Posted in wrong forum
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.