HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

MAC Address for NIC3: disabled / Incorrect nic is displayed - in RBSU

 
Peter_280
Occasional Contributor

MAC Address for NIC3: disabled / Incorrect nic is displayed - in RBSU

I am having a problem with a BL20p G3 which has one odd configured nic in the bios.

In the general RBSU screen it says:
"MAC Address for NIC3: disabled" where the other three available nics are correctly listing their mac addresses.

In the RBSU "PCI Devices" section the adapter is listed as "Ethernet Network controller". this should be "HPNC7781 Gigabit Server Adapter port x", just like the other three available nics.

As a result Windows is not detecting the nic correctly (exclamation mark in device manager) so the driver has to be installed manually. This is undesireable because we are using automated deployment of our servers.

Any help is appreciated!




1 REPLY
Peter_280
Occasional Contributor

Re: MAC Address for NIC3: disabled / Incorrect nic is displayed - in RBSU

Posted in wrong forum