MIB Change on Proliant G8?

[topher27]

Hi,

I'm trying to add the OID to monitor HP physical disks status on my DL380 G8 with WIndows 2012 and MIB walker tool cannot find anything for this model. I am using  OID 1.3.6.1.4.1.232.3.2.5.1.1.6 and no instances are appearing. WHen I use the same OID on a Proliant G7 with Windows 2008 it works fine. I have several G8's with the same issue. Was there any kind of change in the OS or HP MIB from the G7 to G8? I know the SNMP credentials are correct, I'm pretty sure all the correct HP agents are loaded on the server. What else can I check?  Thanks in advance.

Chris

[Torsten. · Accepted solution]

In G7 and previous you have management agents, in Gen8 and later ILO is monitoring the hardware, no agents (except the agentless management) are needed. So you probably don't have such agents, try to query ILO.

[topher27]

Torsten,

That helps. Would it be the same OIDs for the ILO? I want to be able to check the physical disk status. Thanks!

[Torsten.]

check if this helps   http://h20566.www2.hpe.com/hpsc/doc/public/display?docId=emr_na-c04272529

[topher27]

I just got a chance to try it. Yes, it appears the OIDs are the same.  Thanks!!!!  8-)