ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

MIB HP Proliant G4

 
SOLVED
Go to solution
romain0412
Advisor

MIB HP Proliant G4

Good morning,

I research the MIB ok HP ProLiant DL380 G4. I haven't HP SIM installed (I have lost the installation CD's).

Where can I download them? I want to monitore the hardware states by receiving trap snmp send by ILO.

I need to have the MIB in order to translate the OID.

Thanks for your help.

Romain
13 REPLIES
Prokopets
Respected Contributor
Solution

Re: MIB HP Proliant G4

Romain, you can download SIM from here: http://h18000.www1.hp.com/products/servers/management/hpsim/download.html . And here: http://www.hp.com/wwsolutions/misc/hpsim-helpfiles/simsnmp.pdf you can read how to get MIBs from SIM.

Regards,
Philipp.
romain0412
Advisor

Re: MIB HP Proliant G4

Thanks for your help.

Can you confirm that the OID send by ILO traps, come from the MIR of the server and not from the MIR of the ILO?

The ILO card have it proper MIB? Or the traps sended wah based on the MIB of the server? Or the MIB of HP SIM?

Thank's and sorry for my english...

Romain
Prokopets
Respected Contributor

Re: MIB HP Proliant G4

>>Can you confirm that the OID send by ILO traps, come from the MIR of the server and not from the MIR of the ILO?

I'm not sure if i understood you correctly...
There are two types of traps:
1) iLO traps are sent from HW agent via it's own network management interface that is not visible from OS.
2) SMH traps are sent from software agen installed during setup or later and this traps are sent via one of server's NICs.


>>The ILO card have it proper MIB? Or the traps sended wah based on the MIB of the server? Or the MIB of HP SIM?

As far as i know, traps from hardware agents and software agents have different OIDs in MIB. You can check it, just compare the MIBs from SIM.

Regards,
Philipp.
romain0412
Advisor

Re: MIB HP Proliant G4

Do you know where can I download the ILO MIB?

I will receive the ILO Traps on my monitoring server.

The HP SIM is for an another project.

Finally, I just need ILO MIB.

Thanks for your help.
Prokopets
Respected Contributor

Re: MIB HP Proliant G4

>> Do you know where can I download the ILO MIB?
Well... Generally, there's two ways to get MIBs:
1) Unofficial, from sites like http://www.oidview.com/mibs/detail.html
2) Official: from HP, for example - you can take MIBs from some HP software like SIM, NNM, etc. Off course, you don't need to install this software to do it :)

Actually both ways are good, but i prefer to use official one.

Regards,
Philipp.
romain0412
Advisor

Re: MIB HP Proliant G4

You think I can found ILO MIB in wich software? In the firmware for example?

The ILO isn't a software so I don't know where can I search.

I've already saerch on the website oidview.

Thanks for your help,
Prokopets
Respected Contributor

Re: MIB HP Proliant G4

Romain, try to look here: http://h18000.www1.hp.com/products/servers/management/hpsim/mibkit.html
That's MIB update kit for SIM, it's quite small (4Mb) and you don't need to download full SIM just to dig MIBs out from there.
romain0412
Advisor

Re: MIB HP Proliant G4

Thanks,

The MIB of SIM is the same of the ILO?

I will analyse the ILO traps, so I need the MIB used by the ILO.

Thanks a lot for your help.

Romain
Prokopets
Respected Contributor

Re: MIB HP Proliant G4

SIM contains whole collection of MIBs for supported hardware, and i'm pretty sure that this collection contains MIBs for iLO too. Look in MIBs headers, there should be a description.
romain0412
Advisor

Re: MIB HP Proliant G4

Thanks a lot.

I will look at that.

Thanks !
romain0412
Advisor

Re: MIB HP Proliant G4

Do you know why there is some MIB call CiscoChassis or anything else?

There are a lot of MIB of other brand.

But not ILO...
Prokopets
Respected Contributor

Re: MIB HP Proliant G4

Romain,
SIM supports not only HP hardware, so obviously there should be MIBs from all supported vendors. As for MIBs iLO, they should be somewhere in 1.3.6.1.4.1.232. tree. It's quite simple to find them: just run snmpwalk on your iLO ip and then find the exact OIDs description in MIB database, that you downloaded from HP.
It's little more simple way to get this info: try to use snmpwalk tool from Oidview, it will automatically download corresponding descriptions from their site.

Philipp.
beeloo
Occasional Visitor

Re: MIB HP Proliant G4

I just download the MIBs, but I have difficult to locate the one for monitor either the HP iLO or proliant servers. Could you please let me know which mib file should I look into? Thanks in advance.