ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

MIBs required for "HP Smart Array P420/1GB FBWC"

-e
Occasional Advisor

MIBs required for "HP Smart Array P420/1GB FBWC"

Hi,

 

One of our customer purchaged "HP Smart Array P420/1GB FBWC

" to integrate that we required the following details.

 

 

-          MIB

-          Alarm Documentation

-          Alarm List

-          Features like AlarmUpload

                 Is it supported?

                 If yes how to perform(eg., set based/get based etc.,)

 

Could you please help in getting the above details for "HP Smart Array P420/1GB FBWC"

 

Thanks in advance.

 

Ezhil

9 REPLIES
Torsten.
Acclaimed Contributor

Re: MIBs required for "HP Smart Array P420/1GB FBWC"

A MIB is not enough. You need some software that monitors the array controller. This software is able to report etc ...

 

For older proliant servers you need to have the SNMP/WMI agent bundles, for newer models the ILO is monitoring all the hardware.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
-e
Occasional Advisor

Re: MIBs required for "HP Smart Array P420/1GB FBWC"

Hi,

 

Thanks for the information.

 

Actually we want to integarte this "HP Smart Array P420/1GB FBWC" to NMS to monitor the faults that are being raised.

 

For this integration we required the following information

 

-          MIB

-          Alarm Documentation

-          Alarm List

-          Features like AlarmUpload

                 Is it supported?

                 If yes how to perform(eg., set based/get based etc.,)

 

Thanks and Regards,

Ezhil

Torsten.
Acclaimed Contributor

Re: MIBs required for "HP Smart Array P420/1GB FBWC"

What server model?


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Andrew_Haak
Honored Contributor

Re: MIBs required for "HP Smart Array P420/1GB FBWC"

Normaly people use HP SIM for monitoring hardware, but if you use an other software package you can download the mib updates intended for SIM as this update contains the mibs you probably need. Look at http://h20566.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c04272529http://h20566.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c04272529

Kind regards,

Andrew
saswat
Occasional Visitor

Re: MIBs required for "HP Smart Array P420/1GB FBWC"

Hi Andrew will hpsim mibs work for "HP Smart Array P420 Controller". http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04111534

-e
Occasional Advisor

Re: MIBs required for "HP Smart Array P420/1GB FBWC"

Thanks for the information provided. 

After downloading the mibs from the link provided to download the mib updates intended for SIM,we went through the list provided and found that for CPQIDA-MIB, some of the valid types are:

HP Smart Array P600 Controller 
HP Smart Array P400 Controller
HP Smart Array P400i Controller
HP Smart Array P800 Controller 

But no mib was specifically mentioned for HP Smart Array P420/1GB FBWC.


So,is the mib CPQIDA-MIB suitable for HP Smart Array P420/1GB FBWC? 

 

Thanks and Regards,

Pramita

Torsten.
Acclaimed Contributor

Re: MIBs required for "HP Smart Array P420/1GB FBWC"

MIBs are included for the following smart array controllers:

 

sa-5i(19),
    sa-532(20),
    sa-5312(21),
    sa-641(22),
    sa-642(23),
    sa-6400(24),
    sa-6400em(25),
    sa-6i(26),
    sa-generic(27),
    sa-p600(29),
    sa-p400(30),
    sa-e200(31),
    sa-e200i(32),
    sa-p400i(33),
    sa-p800(34),
    sa-e500(35),
    sa-p700m(36),
    sa-p212(37),
    sa-p410(38),
    sa-p410i(39),
    sa-p411(40),
    sa-b110i(41),
    sa-p712m(42),
    sa-p711m(43),
    sa-p812(44),
    sw-1210m(45),
    sa-p220i(46),
    sa-p222(47),
    sa-p420(48),
    sa-p420i(49),
    sa-p421(50),
    sa-b320i(51),
    sa-p822(52),
    sa-p721m(53),
    sa-b120i(54),

 

(taken from the file "cpqida" linked above).

 

 

 

 

Question remains - what server model?

 

 

The MIB is useless without any kind of agent that provides the information.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
-e
Occasional Advisor

Re: MIBs required for "HP Smart Array P420/1GB FBWC"

Hi  Torsten,

 

We are not very sure about the server model being used in the lab. Can you please let us know what are the server models which can be connected to this controller? Is this MIB server-specific or some default MIBs are there for the communication?

 

Thanks and Regards,

Pramita

Torsten.
Acclaimed Contributor

Re: MIBs required for "HP Smart Array P420/1GB FBWC"

The question is if the server is a Proliant Gen8 or Gen9 or an ealrlier model - for earlier models you need to run (snmp) agents on the OS, for newer server servers you can monitor all the hardware via ILO.

 

Consider to monitor all the hardware, not only the RAID controller.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!