ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML 110 G5 - System FAN on max speed

 
SOLVED
Go to solution
The Sid
Occasional Contributor

ML 110 G5 - System FAN on max speed

AFter upgrading to the latest BIOS my systemfan runs on 4400rpm continously. I have tried downgraded to the previous one, but the problem persists.

I have tried with clearing the CMOS with the onboard jumper but no success with that either.

My current BIOS is; 2009.10.09 (A)

Ive noticed that ppl have been having this problem and in those cases it was the iLO that was the problem, but i have no iLO in this server and i use the onboard SATA controller.


Any ideas?
2 REPLIES
Solution

Re: ML 110 G5 - System FAN on max speed

Hi,

This try. hope it will resolve ur issue,

Firmware Upgrade for HP ProLiant ML115 G5\ML150 G5\ML110 G5\DL180 G5\DL120 G5 Lights-Out 100 Remote Management (For USB Key-Media)
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3577708&prodNameId=3577715&swEnvOID=4022&swLang=8&mode=2&taskId=135&swItem=MTX-c003654e6340476b8af81d2f3b

This is how we thank each other in the forum

http://forums11.itrc.hp.com/service/forums/helptips.do?#33

Regards.
Kind Regards,
Erdogan.
I am HPE Employee

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.
The comments in this post are my own and do not represent an official reply from the company. No warranty or guarantees of any kind are expressed in my reply.
The Sid
Occasional Contributor

Re: ML 110 G5 - System FAN on max speed

Worked like a charm. Before i close this as solved, why does this upgrade affect me even though i dont have any ilo in my server?