ML 150 G2 RAID Controller Driver for Windows Server 2003 32 Bit

[Atif Noor]

Hi All,

We are facing Raid Controller Drivers issue in ML 150 G2 Server. We have tried all of the drivers available on HP Site http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3279685&prodTypeId=15351&prodSeriesId=435422&swLang=8&taskId=135&swEnvOID=1005#113214

But failed. The Controller type is Adaptic Controller and it have a HP Spare Part # 373013-001 and HP Part # 370901-001 and the CT # P8C240ANVSB0BG.

We have downloaded the drivers from hp site extreceted them and copy the extrected files only on Flopy and press F6 when windows server 2003 setup starts and loaded the driver. it loads successfully but later on setup it prompts that no drives are detected.

Any Solution-Any Driver for ML 150 G2 Server for Windows Server 2003 (32Bit)

Any Urgent Help is required as its too critical for us.

[Suman_1978 · Accepted solution]

Hi,

ML150 G2 with Adaptec/HP controller part# 373013-001 is a Serial ATA (SATA) interface, 4-port.

This is the driver link:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=435422&swItem=MTX-UNITY-I23061&prodNameId=3279685&swEnvOID=1005&swLang=8&taskId=135&mode=4&idx=0

When you unzip the file, you will see a single .exe file.
When the .exe file is executed, it will copydisk sata.img a:
When running the installation CD for Microsoft Windows 2003, F6 is pressed to install the controller driver.

One suggestion if you want to do it without floppy
http://bizsupport1.austin.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01382037

Thanks

[Atif Noor]

Thank You Summan,

Thanks For Your Kind Reply. The drivers you have provided realy works. Now we have Successfully installed the WinServer 2003.

Thanks for your kind support.

Regards,

Atif Noor

Premier Systems Pvt. Ltd