ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML 150 G3 Powering on, not booting

TMeredith
Occasional Visitor

ML 150 G3 Powering on, not booting

I have a Proliant ML 150 G3 Server with an E200 Array controller and a SCSI Host adapter in two expansion slots. It has 5 sas drives one configured as a hot spare and 3GB memory. The machine worked quite well for about 3 months. Now when it is powered on the fans all come on high, the power light is green and stays on, the Optical drive and tape drive lights flash. But after that it appears as though there is no power to the these drives, the fans remain spinning at high speed, and there is no display.
Any advice? Thank you.