ProLiant Servers (ML,DL,SL)
1753779 Members
7566 Online
108799 Solutions
New Discussion

Re: ML 150 G5 Turns on for 5 sec and then turns off again.

 
Constantinos.i
New Member

ML 150 G5 Turns on for 5 sec and then turns off again.

ML 150 G5 Turns on for 5 sec and then turns off again.

Here is what it does:

I push the power button and all external panel leds turn green and the all the fans work.
Before even the screen turns on , the fans stop and the server stops responding and turns off.
After that to try to start it again I have to disconnect the power cable and retry.
Upon opening it , I tried to reset the CMOS , and still nothing.
I tried disconnecting and reconnecting RAM , RAIDS , DVD's ... still nothing.
LED 6 is green constantly , while LED 1 (which I'm still trying to find out what it does) is blinking Green constantly EXCEPT those first 1-2 seconds when the server starts. After that it starts blinking (green always) and the server turns off.

Any ideas?
3 REPLIES 3
Erdogan Temur
HPE Pro

Re: ML 150 G5 Turns on for 5 sec and then turns off again.

Hi,

Check the power button.(Unplug switch and start system)
Kind Regards,
Erdogan.
No support by private messages. Please ask the forum!

Accept or Kudo

Iraklis Sifakis
New Member

Re: ML 150 G5 Turns on for 5 sec and then turns off again.

i have exactly the same problem. I ordered a new PSU but still the same problem occurs. I thought about changing the system board but 800 euro are really too much. Isn't there any other way to diagnose the server? i would really appreciate any help
freeze_pisces
Occasional Visitor

Re: ML 150 G5 Turns on for 5 sec and then turns off again.

i have same problem with ML150G5, but solved by upgrade lights out 100 firmware to 3.20B. Process takes arround 10minutes & needs power cycle.. after that.. lancar jaya.. (happy ending)..