ML 150 G5 - embedded storage controller driver to W2008

[KarloChacon]

Hello
Check this
I did more research about ML150 G5.
check what I found

for the embedded SATA RAID driver there are two versions

1.4.17010.0 HP shows this one as the current when it is not.
1.4.17015.0 this is the latest but HP does not show it until you click in revision history

I'm not going to get into details but if you download both and check version 1.4.17015.0 has a newer date than 1.4.17010.0. if you want to download both and check .inf file....

in fact you can see it says initial release so HP as always you know messing things up...

also check this
http://forums12.itrc.hp.com/service/forums/bizsupport/questionanswer.do?threadId=1210745

this is how I found that.


so according with that 1.4.17015.0 is the one that works even saying that is for W2003 it will work for W2008

so this is the one

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3577708&prodNameId=3577715&swEnvOID=1005&swLang=8&taskId=135&swItem=MTX-0dbf82cb9fd24c929b6bdb4da7&mode=3

and also here as forum thread
http://www.versiontracker.com/dyn/moreinfo/win/150921

try that and let us know
regards

[Jan Stenhoff]

Hi
Thank you very much, this is a god solution but i got BlauScreens almost every second time I restart the server.

I have tested a lot of installations methods of this driver but the only thing who works it´s during the OS installation.

And then when I use RAID 1 whith this driver I get the same problem that with Blau Screens like the tread:
http://forums11.itrc.hp.com/service/forums/bizsupport/questionanswer.do?admit=109447626+1207089649176+28353475&threadId=1210745

So this is fine so far but not good enough.
Thanks!

[KarloChacon]

hi jan

were you able yo install your W2008?

if so which driver?

regards

[Jan Stenhoff]

Hi

I use the driver you recomended so far and I get BlauScreens sometimes when I reboot. But now I have seen new drivers on HP support web, I´d not tested this yet but soon I will do and I will get back.

Thanks for your help!

// Jan