ML 150 G5 w/HP RAID SNMP

[ML150 HP RAID]

Apparently there is no management tool from HP to manage their onboard RAID, so does anyone know how a failed drive would be reported to the system so that I can configure SNMP to report the error from the event log? btw- this is on Win2K8 x64.

Thanks in advance!

[Gary Benavides Meza]

HP Embedded G5 SATA RAID Controller Manager for Windows Server 2003/2008 x64 Editions

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3580609&prodNameId=3580646&swEnvOID=4024&swLang=8&mode=2&taskId=135&swItem=MTX-0ab0b45297114be080668cb6fa

[ML150 HP RAID]

Thanks! I'm going to give that a try right now. Funny thing is that I was told by HP T/S that there was no management tool for the ML150G5 onboard RAID and that the only way to have some sort of management/SNMP would be to add a SmartArray card into the system.

Thanks again!

[ML150 HP RAID]

So I installed the Adaptec RAID manager. Says no controllers were found. The onboard RAID is from nVidia, not Adaptec. I made a mistake on the model of the server, it's actually a ML115, not ML150.