cancel
Showing results for 
Search instead for 
Did you mean: 

ML 150 G5

 
SOLVED
Go to solution
MSchnatmann
Occasional Contributor

ML 150 G5

Hi everybody,

is it possible to combine a hot-plug hdd cage and a non hot-plug hdd cage in the ml 150 G5?

If yes, what is the part number for the non-hot-plug hdd cage?

I only found the hot-plug hdd cage part number :-(

Cheers

Mike
5 REPLIES
billyb5000
Occasional Visitor

Re: ML 150 G5

What raid card do you have?
If you are using an extra card that supports hot plugging ( I installed an e200 card in my 150 g5, and that does support it), then you should be able to mix them.

If not, check the service manual (goto manuals when you are at the ml150 g5 support page)and search for the part number for the non hot plug drive cage listed there.
MSchnatmann
Occasional Contributor

Re: ML 150 G5

Hi,

thanks a lot for the response but that was not my question.

I am searching for the part number of the NON-HOT-PLUG-HDD-CAGE for the ML 150 G5.

I allready searched through the quick specs and all other docs I found but I was not able to locate the right part.

Anybody else an idea?

Cheers

Mike
KarloChacon
Honored Contributor
Solution

Re: ML 150 G5

hi

""I am searching for the part number of the NON-HOT-PLUG-HDD-CAGE for the ML 150 G5.""

Non-hot-plug hard disk drive (HDD) cage 464188-001

source page 16
http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c01310807/c01310807.pdf

bye

Didn't your momma teach you to say thanks!
MSchnatmann
Occasional Contributor

Re: ML 150 G5

Hi Karlo,

thanks a lot.

I have to get new glasses...

Cheers

Mike
KarloChacon
Honored Contributor

Re: ML 150 G5

cool

http://forums12.itrc.hp.com/service/forums/helptips.do?#33
Didn't your momma teach you to say thanks!