ML 350 G2 - Only Power Indicator LED

[Nurhadijanto Djoko]

Hi all,
I'm having trouble with my ML350 G2 (after more than 5 years).
My server cannot boot, and front panel shows Power LED is ON, but the rest is OFF.
From REAR PANEL, there are no LED ON, include on Power Supply Modul. But FAN is Running (sound is very Loudly).
1. Is it Power Supply failure ? (System LED shows ON at Power Supply)?
2. Any idea?

Thanks for support.

[Kotate · Accepted solution]

Hello,

knowing that the power supply has no lights (as I understand), that could mean that there is no power (but you have a green light in front), over-current, power supply is in Stand-by mode, or power is bad.

So I would recommend, if possible, try the power supply on a different server, or try to get a secondary power supply to check if the issue is with the slot...

But yeah, probably power supply isue!

[Nurhadijanto Djoko]

Yes, I agree with you about Power Supply issue.
Hopefully, I can get this module (rent/buy), since this old system , right? just for take back my data first.
I will close this issue
Thanks,

[Nurhadijanto Djoko]

Replace the PS unit.