HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML 350 G2 - Only Power Indicator LED

 
SOLVED
Go to solution
Nurhadijanto Djoko
Occasional Visitor

ML 350 G2 - Only Power Indicator LED

Hi all,
I'm having trouble with my ML350 G2 (after more than 5 years).
My server cannot boot, and front panel shows Power LED is ON, but the rest is OFF.
From REAR PANEL, there are no LED ON, include on Power Supply Modul. But FAN is Running (sound is very Loudly).
1. Is it Power Supply failure ? (System LED shows ON at Power Supply)?
2. Any idea?

Thanks for support.
3 REPLIES
Kotate
Advisor
Solution

Re: ML 350 G2 - Only Power Indicator LED

Hello,

knowing that the power supply has no lights (as I understand), that could mean that there is no power (but you have a green light in front), over-current, power supply is in Stand-by mode, or power is bad.

So I would recommend, if possible, try the power supply on a different server, or try to get a secondary power supply to check if the issue is with the slot...

But yeah, probably power supply isue!
Nurhadijanto Djoko
Occasional Visitor

Re: ML 350 G2 - Only Power Indicator LED

Yes, I agree with you about Power Supply issue.
Hopefully, I can get this module (rent/buy), since this old system , right? just for take back my data first.
I will close this issue
Thanks,
Nurhadijanto Djoko
Occasional Visitor

Re: ML 350 G2 - Only Power Indicator LED

Replace the PS unit.