HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML 350 G4 SATA RAID Boot

 
Arch Stockton
Occasional Contributor

ML 350 G4 SATA RAID Boot

I am unable to correctly configure My ML 350 G4 to boot to the "HP 6 Port SATA RAID" card. I have configured an array on the controller and setit as the boot array. I have set that card as the boot controller, but in smart-start Hardware Configuration screen reports that the boot controller disk size is 0.

Please help me set this so that smart start recognizes the boot disk.

Thank you
Arch Stockton
SwRI
2 REPLIES
Terry Hutchings
Honored Contributor

Re: ML 350 G4 SATA RAID Boot

Smart Start doesn't support an assisted install on any server with a SATA riad controller enabled.
The truth is out there, but I forgot the URL..
e4services
Honored Contributor

Re: ML 350 G4 SATA RAID Boot

Do a manual install, without the smartstart.
Hot Swap Hard Drives