ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML 350 G6 server with UBUNTU 9.04 Server

 
chowtaMah
Occasional Advisor

ML 350 G6 server with UBUNTU 9.04 Server

We are installing ubuntu Server 9.04 in

ProLiant ML350G6(Tower Model) / Hot Plug LFF Model/(1) Quad-Core Intel Xeon E5504Processor (2.0GHz, 80 Watts, )/ 4MB Level 3 cache / 4GB (2 x 2 GB) PC3-10600R (DDR3-1333) Registered DIMMS /Embedded NC326i Dual port Gigabit Server Adapter / Smart Array P410i with no memory/ DVD ROM Drive/460 Watt Power Supply/ 4TB sata hard disks.

Installation went well. LILO starts and gives the following message

LILO 22.8 Load i Linux...............................
.............
.............
BIOS data check successful




PANIC: early exception 0e rip 10:ffffffff80226aa3 error 0 cr2 ffffffffff5fc0f0


How I can continue? Please Help me.
9 REPLIES
cg_cor
Occasional Visitor

Re: ML 350 G6 server with UBUNTU 9.04 Server

Hola, estoy realizando este mismo proceso en el mismo servidor pero un G5, y me da el mismo error. No se a que se debe, si usted logro resolverlo, agradeceria me lo indicara, por otro lado si yo logro resolverlo le voy a enviar la solucion.

Saludos

chowtaMah
Occasional Advisor

Re: ML 350 G6 server with UBUNTU 9.04 Server

Thank you,

But I could not understand your language. Can you please provide details in English. Please help me.

Michal Kapalka (mikap)
Honored Contributor

Re: ML 350 G6 server with UBUNTU 9.04 Server

hi,

the message : tranlated by google

translate.google.com from spanish ==> english.

Hello, I'm doing this same process on the same server but a G5, and I get the same error. Not that it should, if you can achieve it, agradeceria me indicate, on the other hand if I managed to solve it I'll send you the solution.


- what about try the Ubuntu 9.10, yes i know is still in developing, but for test if its better ??? Most of this error are related to the kernel version.

mikap
chowtaMah
Occasional Advisor

Re: ML 350 G6 server with UBUNTU 9.04 Server

Yes. We are using Ubuntu 9.04. I used amd64 iso. Now I am downloaded i386 iso and i am installing it. If anything, i will come back. Thanks
Michal Kapalka (mikap)
Honored Contributor

Re: ML 350 G6 server with UBUNTU 9.04 Server

hi,

the 64bit linux, is sometimes strange.

mikap
Michal Kapalka (mikap)
Honored Contributor

Re: ML 350 G6 server with UBUNTU 9.04 Server

hi,

check the UBUNTU web site :

http://webapps.ubuntu.com/certification/list/?category=Server

the ML 350 G6 is not certified to run a ubuntu on it.

mikap
chowtaMah
Occasional Advisor

Re: ML 350 G6 server with UBUNTU 9.04 Server

Ok I tried with iso 386. Installation went well. On booting, it comes with this message

BUG: Int 14: CR2 ffffb0f0 ...............

STACK:


---------------

Ok, if ubuntu is not certified, for which we can go? How about CentOS
Michal Kapalka (mikap)
Honored Contributor

Re: ML 350 G6 server with UBUNTU 9.04 Server

hi,

check this site ==>

linux on proliant servers :

http://h18000.www1.hp.com/products/servers/linux/index.html

check this :

http://h18000.www1.hp.com/products/servers/linux/linuxcommunity/index.html

Officially the RHEL and SLES is supported :

http://h18000.www1.hp.com/products/servers/linux/hplinuxcert.html

The RHEL is binary compatible with CentOS, so it will be ok.


mikap
chowtaMah
Occasional Advisor

Re: ML 350 G6 server with UBUNTU 9.04 Server

Ok. Now it is installed. Yes. I installed UBUNTU 9.04 IN HP ML350 G6 SERVER. Still, many things I has to learn.

thanks