ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML 350 Problem Press F1 to continue

 
asaqer
Occasional Visitor

ML 350 Problem Press F1 to continue

I have format my server. RHEL4 is now loaded on it.
Everytime if i
leave the server without working on it for approx an hour it rebootes by
itself and stop at the option where it says :

System currently configured for Windows 2000/windows 2003

Press F1 to continue

Press F9 for ROM based setup utility

Press F10 for System Partition utilities
Press F12 for PXE Boot

Why is it doing this and how can i solve it?
1 REPLY
Terry Hutchings
Honored Contributor

Re: ML 350 Problem Press F1 to continue

What generation is this server?

The server is stopping at the option to press F1, F9, F10, or F12 due to some POST error. Having the server stop at the prompt can be changed within the BIOS. I am interested though in what POST error is showing though.

Do you have the PSP installed on this server? If so, you should be able to open the systems management homepage and possibly see what the cause is for the reboots. I would also recommend looking in the Integrated Management Log to see what errors that shows.
The truth is out there, but I forgot the URL..