ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML 370 G2 has 1.266 GHZ give unsupported processor error How to resolve this.

Rahul Sharma
Frequent Advisor

ML 370 G2 has 1.266 GHZ give unsupported processor error How to resolve this.

I have this proliant ML 370 G2 has 1.266 GHZ gives 805: unsupported processor error How to resolve this. From where i can download the latest rom version to get this working.
Please help it is urgent. My 3 servers are down i need help to install windows 2003 on them.Thanks in advance.
1 REPLY
Prashant (I am Back)
Honored Contributor

Re: ML 370 G2 has 1.266 GHZ give unsupported processor error How to resolve this.

Hi,

try the following
Invoke the ROMpaq Recovery Procedure by performing the following:
1) Set switches 1, 4, 5, and 6 on the server's Configuration Maintenance Switch Pack to the ON position
2) Boot the System ROMPaq diskette available for the specific model server.
3) Listen for two long beeps issued by the System indicating the procedure has begun
4) Listen for a sequence of ascending (increasing) tone beeps after flashing is complete
5) Check for a message in the IMD that will indicate a successful operation is completed (If equipped with one)
6) Power off the server and remove the System ROMPaq diskette.
7) Restore the Configuration Maintenance Switch Pack switches to their original positions.
8) Power up the server and observe for symptoms.

or

Apply a System ROM recovery with latest ROMpaq from
http://h18007.www1.hp.com/support/files/server/us/index.html

regards,
Prashant Sharma
Nothing is impossible