cancel
Showing results for 
Search instead for 
Did you mean: 

ML 370G5

ahmed zakarya
Occasional Contributor

ML 370G5

I need Help To fix this Problem
3 REPLIES
Pieter 't Hart
Honored Contributor

Re: ML 370G5

whats the problem you ask help for?

power-supply failed or unplugged seems clear to me-> replace PSU or plug in power cable.

disk controller omtimization scan => wait until scan has completed, or accept reduced performance during the scan.
ahmed zakarya
Occasional Contributor

Re: ML 370G5


1729-Slot 1 Drive Array - Performance Optimization Scan In Progress...
...RAID 4/5/6 performance may be higher after completion


this is the problem
RaMpaNTe
Trusted Contributor

Re: ML 370G5

There is actually no problem at all this is a normal informational message which requires no user intervention. There is a parity initialization happening, so you just need to wait until its done. Your data is safe. Do not worry.
You heve a question... I have an aswer!!!