ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML 530 G1 power supply failure

Eric Pearson cjl
Occasional Visitor

ML 530 G1 power supply failure

Hello,

I recently had a short occur on an old ML530 first generation. Got a message at boot saying a power failure on bay 1 of power supply. I ordered a new power supply using the part number of the broken one. When I install the new power supply I keep getting the error message. Any advice?

Thanks

Eric
7 REPLIES
Oleg Koroz
Honored Contributor

Re: ML 530 G1 power supply failure

update: System ROM, System Driver, IM Agents - restart box
reseat backplane for PSU or cables

http://h18023.www1.hp.com/support/files/server/us/index.html




Michael Richter
Trusted Contributor

Re: ML 530 G1 power supply failure

additional check: power chord, psu led, external health led .. if status is well, clear/repair IML Entries

cheers
Michael
Eric Pearson cjl
Occasional Visitor

Re: ML 530 G1 power supply failure

Thanks for the info guys, I think that upgrading ROM might do the trick since the new PS is rev.2 and the old one was rev. 1

But unfortunatly I can'T upgrade since it won't let me past those error codes.
Oleg Koroz
Honored Contributor

Re: ML 530 G1 power supply failure

what happened if you move to next bay ?
Eric Pearson cjl
Occasional Visitor

Re: ML 530 G1 power supply failure

If I move to another bay it says incompatible power supply in bay #.

It's like the system can'T see the new power supply as a correct one.

An HP tech is on the way, hopefully he'll figure this out. I'll post the solution if there is one.

Thanks for all your help.

Eric
RaMpaNTe
Trusted Contributor

Re: ML 530 G1 power supply failure

Hi Eric, make sure you used the following power supply SPS number 157793-001 if you are getting the same error after updating the BIOS, what you need to do and what the HPs tech is going to do is to replace the Power Supply Backplane Board 159314-001.

Let me know what happens...

Thank You!
You heve a question... I have an aswer!!!
Eric Pearson cjl
Occasional Visitor

Re: ML 530 G1 power supply failure

Well like I said I can'T update the BIOS since I can't get past those error message, the tech took a look on friday and think the new power supply was DOA, he also ordered a new backplane just in case.