ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML 570 G3 Not Booting

 
Sean_195
Occasional Contributor

ML 570 G3 Not Booting

With both power cables in the server will not boot , all fans just reving , orange light on power button. If UID is put on and then the power button is pushed , server boots up.Have changed power backplane , same result.
Please advise.
Thanks
3 REPLIES
Michael A. McKenney
Respected Contributor

Re: ML 570 G3 Not Booting

Make sure all the connections to the board are tight. I have a similar issue on the DL 380 G5. The fan power between the front of the chassis and CPUs was loose. It is a cable about 3 inches long. Looks like a 50 pin SCSI connection. It was next to the one CPU. It was loose and the server would not boot. So check all the connections. Reseat all the RAM and CPUs.
Sean_195
Occasional Contributor

Re: ML 570 G3 Not Booting

Thanks for the feedback. But have already do all that.Any other ideas that might help ?
Ali
HPE Pro

Re: ML 570 G3 Not Booting

HI Sean,

Can you please elaborate the issue little bit.

did you mean server does not boot with two power supplies..?

thanks,
aftab
I work for HPE
Looking for a quick resolution to a technical issue for your HPE products? HPE Support Center Knowledge-base – Just a Click Away!
See Self Help Post for more details