ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML10v2 (G3240) Boot Failure - System Temp Critical?

bonifacefj
Occasional Contributor

ML10v2 (G3240) Boot Failure - System Temp Critical?

Hello,

I received an ML10v2 today.  I haven't installed any HDDs yet but have installed a SATA optical drive which is connected directly to the m-board.

The server doesn't boot and doesn't produce a video output, iLO shows critical system health - 'Critical Temperature Threshold Exceeded' which it most definantly is not.  Looks like a faulty temp sensor.

Any ideas?

Cheers,
Fred.

2 REPLIES
Suman_1978
HPE Pro

Re: ML10v2 (G3240) Boot Failure - System Temp Critical?

Hi,

I would try Clearing NVRAM from the System Maintenance Switch.  Page 59.

http://www.hp.com/ctg/Manual/c04622389

 

I am guessing that the system board is faulty, if the above step does not fix the issue.

 

Thank You!
I am a HPE employee
__________________________________________
Was the post useful? Click on the white KUDOS! Thumb below to say Thank You!

>> Useful Links for ProLiant Servers

>> Self Solve Options for ProLiant Servers

bonifacefj
Occasional Contributor

Re: ML10v2 (G3240) Boot Failure - System Temp Critical?

The cause was a faulty ambient temperature sensor. The part is now replaced and the system works perfectly

Thanks,
Fred