ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML110 G10 with E208i-p SR (804394-B21) controller and SATA NHP drives

 
SandroP
Visitor

ML110 G10 with E208i-p SR (804394-B21) controller and SATA NHP drives

I've a simple question. If I plug in a  ML110 Gen10 server a E208i-p SR controller, can I connect the 4 NHP SATA drives (801882-B21  - 1 TB) already installed?

I've found on the ML110 Gen10 QuickSpecs doc the note "NHP SATA is limited to S100i controller", I found this misleading because on the Smart Array Datasheet is written the Storage protocol 6G SATA is fully supported. 

2 REPLIES 2
ShruthiSK
HPE Pro

Re: ML110 G10 with E208i-p SR (804394-B21) controller and SATA NHP drives

Hi, 

As per the quickspecs of the server, the NHP SATA HDDs can be connected only to the s100i controller.

E208i-p SR controller supports only the hot-pluggble SATA/SAS drives. 

Please let me know if you have any further queries or concerns. 

Regards,

Shruthi (HPE Employee)

----------------

Was this helpful? Like this post by selecting the Kudos option below!

 

Accept or Kudo

SandroP
Visitor

Re: ML110 G10 with E208i-p SR (804394-B21) controller and SATA NHP drives

Thanks Shruthi,

actually in the the QuickSpecs Manual is well explained.

Regards,

Sandro.