ProLiant Servers (ML,DL,SL)
1748208 Members
2778 Online
108759 Solutions
New Discussion юеВ

Re: ML110 G3 Server doesn't start

 
filipe_madureira
New Member

ML110 G3 Server doesn't start

When I turn on the server it gives 6 beeps, and then nothing happens.

The fans are working, the motherboard has 2 leds ON.

The power led on the front panel is ON.

There is nothing displayed on the monitor.

What could it be?

What these 6 beeps mean?
2 REPLIES 2
KarloChacon
Honored Contributor

Re: ML110 G3 Server doesn't start

hi

it can be different since processors issue or memory issues.

try to minimize the server.

1 Proc (the only one I know)
1 memory module
No PCI cards

try to test different memory module one at a time to get which parts is causing that issue

also check that everything is properly seated, processor, heatshink, HDDs and so on

regards
Didn't your momma teach you to say thanks!
filipe_madureira
New Member

Re: ML110 G3 Server doesn't start

I already tryed that.

I have replaced the memory by other modules that are working on other PCs.

I haven't any installed card, and I already tryed without any HardDrive.

I have even replaced the Power Supply unit.

I believe the problem may be in the CPU or motherboard itself, but I thought that the 6 beeps had a meaning.

I didn't found this meaning in any manual.
There are 6 short and fast beeps with the same interval between them.