HPE Community
ProLiant Servers (ML,DL,SL)
1752754 Members
4835 Online
108789 Solutions
New Discussion

Re: ML110 G3 no boot from SCSI hard disk

 
Enrique_18
Occasional Advisor

‎08-10-2007 02:54 AM

‎08-10-2007 02:54 AM

ML110 G3 no boot from SCSI hard disk

Hi:
I have a Proliant ML-110 G3 with SCSI Adapter LSI (spare 339051-001) with a disk SCSI HP non-hotplug. I'm trying install Windows Server 2003 Standard Edition but no boot from hard disk. I'm using an USB FDD original and disk is recognized normally. I am using driver form hp web http://h18023.www1.hp.com/support/files/server/us/download/27273.html .

Install proccess start normally until copy files in finnished and reboot to load from hard disk but at this point bypass hard disk boot
0 Kudos
Reply
1 REPLY 1
Enrique_18
Occasional Advisor

‎08-10-2007 06:43 AM

‎08-10-2007 06:43 AM

Re: ML110 G3 no boot from SCSI hard disk

Closed case. Firmware update to SCSI Controler version 5.05.21.00 (LSI Logic 1030-i) http://h18023.www1.hp.com/support/files/server/us/download/24502.html
It is loading from hard disk OK now
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.