ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML110 G4 and Belkin KVM

 
Piloo
Occasional Visitor

ML110 G4 and Belkin KVM

Hi,

I have a new ML110 G4 (Lab) connected to a 4 port Belkin Omniview E series- which I have used for a good number of years with IBM and Dell servers. Whenever I switch back to the ML110 I have no mouse/keyboard control regardless of OS (XP/W2K/W2003K/W2008K). Renders this server pretty useless for my lab! DOS control is almost imposible also. Is this simply a poor firmware issue and are there any workarounds?

Many thanks

Piloo
1 REPLY
KarloChacon
Honored Contributor

Re: ML110 G4 and Belkin KVM

hi

have you tried updating lo100?
Firmware Upgrade for HP ProLiant ML110 G4 Lights-Out 100 Remote Management

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3186395&swItem=MTX-db961779803c479d9414c0b6ba&prodNameId=3279681&swEnvOID=1005&swLang=8&taskId=135&mode=5

regards
Didn't your momma teach you to say thanks!