HPE Community
ProLiant Servers (ML,DL,SL)
1752806 Members
6281 Online
108789 Solutions
New Discussion юеВ

ML110 G4 kernel update on RAID SLES10

 
Ivica Glavocic
Occasional Contributor

тАО05-13-2007 09:13 PM

тАО05-13-2007 09:13 PM

ML110 G4 kernel update on RAID SLES10

I succesfully installed SLES10 on ML110 G4 with HP embedded SATA RAID on 2x400 GB disks in mirror (F5 and RAID driver on diskette in installation procedure as documented).

Everything works fine with SLES10 default kernel (kernel-smp-2.6.16.21-0.8) until I try to upgrade kernel on latest version (rpm -Uvh kernel-smp-2.6.16.27-0.9.i586.rpm), after update disks (/dev/sda1) are not visible and OS cannot boot.

If kernel upgrade procedure deleted inserted RAID module from configuration, where can I put it back in after update?
0 Kudos
3 REPLIES 3
Ivica Glavocic
Occasional Contributor

тАО05-15-2007 02:01 AM

тАО05-15-2007 02:01 AM

Re: ML110 G4 kernel update on RAID SLES10

Closing topic, problem solved. File modules.dep for new kernel did not have adpahci dependencies in it, as soon as I put it in and made mkinitrd everything worked fine.
0 Kudos
Ivica Glavocic
Occasional Contributor

тАО05-15-2007 02:02 AM

тАО05-15-2007 02:02 AM

Re: ML110 G4 kernel update on RAID SLES10

put adpahci dependencies in modules.dep for new kernel manually
0 Kudos
Pedro Acu├▒a
New Member

тАО09-17-2007 09:52 PM

тАО09-17-2007 09:52 PM

Re: ML110 G4 kernel update on RAID SLES10

Hi Ivica,

Can you explain to me how to enable RAID in SLES10 correctly.
I`ve tried it for a month, asked HP and I haven├В┬┤t found the right way.

Can you help me?

Many thanks
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.