ML110 G5 CPU E2160: fan permanently full speed

[Ricky-Boy]

Hi - I also have the same problem with Fan noise. It worked fine right up until i changed the bios from a 2008 version to a 2010 version. Ok i am running a non supported OS (Windows 7 ultimate) but it was working fine before the bios update. i am wishing i could turn back time but cannot. I had installed the server 2008 x64 drivers on it which had been working fine. when i installed the latest bios it then reinstalled all the system driver bar 1 an ACPI driver and when i try to install the server 2008 x64 driver it tells me my OS is not supported. i understand that the OS it is not supported but it did work and now it doesnt. there must be a way round it. The reason i am using it as a PC is because HP were doing an offer some years ago selling these for a mere £100 which was an opportunity too good to pass up.

any help greatly appreciated as cannot use it as is too loud

[ss31]

Hello,

I had the sane problem after upgrading BIOS to 2010 verson.
Problem solved with  SP49103 (Remote Management FW).

Hope this help !

[Dorje]

I prepared this on usb stick:

http://h20566.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=3577726&swItemId=MTX_c003654e6340476b8af81d2f3b&swEnvOid=1005

Now enjoying the silence.

[matheusmaluf]

Hello!

Would you like to make this file available to me?

I can not access.

Old Bios
SP45854.exe (2.6 MB)
Sistemas ROMPaq Atualização de firmware para HP ProLiant Servidores ML110 G5 (para USB Key-Media)

http://h20000.www2.hp.com/bizsupport/TechSupport/S oftwareDescription.jsp? lang = pt & cc = us & prodTypeId = 15 351 & prodSeriesId = 3577708 & prodNameId = 3577715 & swEnvO ID = 1005 & swLang = 8 & taskId = 135 & swItem = MTX-88855a19cf3 84e07b3ca617154 & mode = 3