ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML110 G5 CPU E2160: fan permanently full speed

 
SOLVED
Go to solution
Johan Guldmyr
Honored Contributor

Re: ML110 G5 CPU E2160: fan permanently full speed

See the ML110 G5 Service and Maintenance Guide page 70 and 71 to clear the CMOS.

http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c01187581/c01187581.pdf

Re: ML110 G5 CPU E2160: fan permanently full speed

Dear Aftab,
I recently contacted HP Support.
They have suggested me to install the following updates:
1. cp014221.exe: BIOS - System ROM Version: 2010.10.25 (13 Dec 2010)
2. SP49103.exe: Firmware Upgrade for HP ProLiant ML110 G5 Lights-Out 100 Remote Management (For USB Key-Media)

...the same procedure that yesterday you had shown me.
Today it worked!
Sorry but I did some wrong step :(

Thanx thanx thanx,
Pasq
Johan Guldmyr
Honored Contributor

Re: ML110 G5 CPU E2160: fan permanently full speed

wow - so even if you don't have the iLO card you should install that ilo upgrade? that's interesting :)

Re: ML110 G5 CPU E2160: fan permanently full speed

Yes Johan and now the fan go slowly and silent :)
The ILO isn't present!
The version of ILO's firmware was 3.05 and now, after update, is 3.20B
Maybe the bios includes part of the ILO's firmware... Boh

Thanx to All!

Re: ML110 G5 CPU E2160: fan permanently full speed

The ilo 100 is part of the system board. The only optional part of the ilo is the remote management board which adds the remote management functionality.
Ricky-Boy
Occasional Visitor

Re: ML110 G5 CPU E2160: fan permanently full speed

Hi - I also have the same problem with Fan noise. It worked fine right up until i changed the bios from a 2008 version to a 2010 version. Ok i am running a non supported OS (Windows 7 ultimate) but it was working fine before the bios update. i am wishing i could turn back time but cannot. I had installed the server 2008 x64 drivers on it which had been working fine. when i installed the latest bios it then reinstalled all the system driver bar 1 an ACPI driver and when i try to install the server 2008 x64 driver it tells me my OS is not supported. i understand that the OS it is not supported but it did work and now it doesnt. there must be a way round it. The reason i am using it as a PC is because HP were doing an offer some years ago selling these for a mere £100 which was an opportunity too good to pass up.

any help greatly appreciated as cannot use it as is too loud

 

ss31
Occasional Visitor

Re: ML110 G5 CPU E2160: fan permanently full speed

Hello,

I had the sane problem after upgrading BIOS to 2010 verson.
Problem solved with  SP49103 (Remote Management FW).

 

Hope this help !

Dorje
Occasional Visitor

Re: ML110 G5 CPU E2160: fan permanently full speed

matheusmaluf
Occasional Visitor

Re: ML110 G5 CPU E2160: fan permanently full speed

Hello!

Would you like to make this file available to me?

I can not access.

Old Bios
SP45854.exe (2.6 MB)
Sistemas ROMPaq Atualização de firmware para HP ProLiant Servidores ML110 G5 (para USB Key-Media)

http://h20000.www2.hp.com/bizsupport/TechSupport/S oftwareDescription.jsp? lang = pt & cc = us & prodTypeId = 15 351 & prodSeriesId = 3577708 & prodNameId = 3577715 & swEnvO ID = 1005 & swLang = 8 & taskId = 135 & swItem = MTX-88855a19cf3 84e07b3ca617154 & mode = 3