ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML110 G5 / SATA RAID - Can't start setup utility

kul
Occasional Visitor

ML110 G5 / SATA RAID - Can't start setup utility

Hi,

i have a new ML110G5 with 2 250GB/150 SATA Disks and I want to build a RAID1 to setup Windows SBS. I have enabled the SATA RAID setting in the BIOS. After the restart there comes the message from the Raid Controller:
HP Embedded SATA RAID Controller BIOS V5.0-0 B2235. Then it says: PRESS F8 for setup. I have pressed F8! The last thing it says is:
Utility Found, Loading Wait...

I have been waiting several times, but it is always the same. I also tried to setup Windows without building the RAID1 first. This worked well and with the HP Storage Manager I can connect to the Controller. But this doesn't help me...

Any hints and ideas?! Thanks!

Has anyone
2 REPLIES
kul
Occasional Visitor

Re: ML110 G5 / SATA RAID - Can't start setup utility

Problem fixed:

I disconnected the internal DAT72 USB Tape and then i was able to start the SATA setup utility......
Florian Tepe
Occasional Visitor

Re: ML110 G5 / SATA RAID - Can't start setup utility

I had the same problem and the HP Support couldn't help me, but you did.

Thank you