ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML110 G9 disk cage SATA Rev 3.3 (?)

 
Robertomcat
Frequent Advisor

ML110 G9 disk cage SATA Rev 3.3 (?)

Currently, and there are some discs that control the power on and off of the disc, with the SATA Rev 3.3.

I wanted to ask if any of you knows if with the cage of hot-plug disks of this server, you could incorporate this type of disks.

HPE ML110 G9
Hot-plug disc cage: 792351-001

3 REPLIES 3
McCoy
HPE Pro

Re: ML110 G9 disk cage SATA Rev 3.3 (?)

Hello,

If you are using non-hot plug Sata Disk drive and want to use the same drive on Hot-plug drive cage then it may not work as the hotplug drive has addtiona HP Smart Drive carrier.

Secondly the mentioned part number is not listed as the supported spare part list for Ml110 Gen9 Server.

https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c04623555

The supported spare for 4-Bay LFF Hot-Plug drive cage is 792351-001

Hope this helps,

 

If you feel this was helpful please click the KUDOS! Thumbs below!

I am an HPE employee
Robertomcat
Frequent Advisor

Re: ML110 G9 disk cage SATA Rev 3.3 (?)

Thanks for all the information, I think the reference I gave you is for a cage of an ML150.

Specifically, my question is whether the compatible cage for the ML110 G9 would support this type of disc:

https://documents.westerndigital.com/content/dam/doc-library/en_us/assets/public/western-digital/collateral/tech-brief/tech-brief-western-digital-power-disable-pin.pdf

Thanks!


@McCoy wrote:

Hello,

If you are using non-hot plug Sata Disk drive and want to use the same drive on Hot-plug drive cage then it may not work as the hotplug drive has addtiona HP Smart Drive carrier.

Secondly the mentioned part number is not listed as the supported spare part list for Ml110 Gen9 Server.

https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c04623555

The supported spare for 4-Bay LFF Hot-Plug drive cage is 792351-001

Hope this helps,

 

If you feel this was helpful please click the KUDOS! Thumbs below!


 

Robertomcat
Frequent Advisor

Re: ML110 G9 disk cage SATA Rev 3.3 (?)

I have been trying to get in touch through the chat, with the S / N and the reference number of the guarantee, and at no time I have been able to communicate with them.

Neither is it a matter of opening a case, since the server works correctly. Any recommendation? Thank you.