ML110 Gen10 iLO Driver for Server 2012 R2

[DBowman]

Hi All,

I have a new ML110 Gen10 installed with Server 2012 R2. I have two Base System Devices showing in Device Manager that need drivers. From looking at the hardware IDs, I think it may be for iLO but I cannot locate a driver for 2012 R2. Any assistence would be appreciated. Thank you.

[krasinka1409]

Hi, 

check out following drivers

ilo management controller driver:

https://support.hpe.com/hpsc/swd/public/detail?sp4ts.oid=1009093346&swItemId=MTX_e196fcb67e1941de959751786f&swEnvOid=4184#tab1

ilo interface driver

https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_e74f93921947408eb5de783d27

BR

[DBowman]

Thank you for the reply.

I had already tried those options, but they do not work as those are for iLO 3/4. This server uses iLO 5.

[krasinka1409 · Accepted solution]

Hi, very sorry, I tought it was a Gen9. 

on Gen10 Servers, (iLO5) you only need the Channel Interface. The Management Controller Driver will no longer be released. 

So here is your link:

https://support.hpe.com/hpsc/swd/public/detail?sp4ts.oid=1010026819&swItemId=MTX_433b12a516e84f6a8747a8cfcf&swEnvOid=4184#tab1

[DBowman]

Thank you very much. That was the one I was looking for. I appreciate the help.