HPE Community
ProLiant Servers (ML,DL,SL)
1752700 Members
5403 Online
108789 Solutions
New Discussion

ML110, Internal RAID and SC44GE SAS/SATA card

 
GRollerson
New Member

‎08-21-2008 03:46 AM

‎08-21-2008 03:46 AM

ML110, Internal RAID and SC44GE SAS/SATA card

Hi

I have an ML110 that i have 2* 250GB SATA drives installed.

Have run out of space so have now installed 2 further 250GB Drives with a SC44GE SAS card.

The SC44GE doesnt see the new drives at all./ It shows up on POST and I can launch the LSI config utility.

Bios has been upgraded to the latest avaiable for the SC44GE as has the server.

I have tried disabling the internal SATA controller - no difference. I have tried different cable connection orders and have tried all 4 drives on the SC44GE with no luck.

thsi has been going on for weeks now and i have exhausted all my knowledge.

anybody out there have any ideas?

Graham
0 Kudos
Reply
1 REPLY 1
KarloChacon
Honored Contributor

‎08-21-2008 05:08 PM

‎08-21-2008 05:08 PM

Re: ML110, Internal RAID and SC44GE SAS/SATA card

hi

which specific ML110 generation? g1? g2? ... g5?


so you can see HDD with the LSI utility.. right?

Can I have HDDs spare/option number?

are they properly connected?

regards
Didn't your momma teach you to say thanks!
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.