ML110: The Power Manager is unavailable for this configuration

[djboris]

Hello

I have a ProLiant ML110 server with iLO 1.26 (last version). When I go to the "Power Meter" in iLO, I see this message: "The Power Manager is unavailable for this configuration.". I tried to change the Power Settings (it displays: "Power Cap is not supported"), but it didn't helped.

How can I display the "Power Meter"?

Thanks

Kind Regards

Boris

[Suman_1978]

Hi,

What is the generation of this ML110?

http://h18004.www1.hp.com/products/servers/management/dynamic-power-capping/support.html

Dynamic Power Capping is supported on all BL/DL/ML G7 or later servers with the exception of the ML110 G7, and DL120 G7. All G7 or later servers ship with the minimum required firmware to enable Dynamic Power Capping Support.

Also please note the following:

http://h18004.www1.hp.com/products/servers/management/dynamic-power-capping/faq.html

For HP ProLiant servers, the following components are necessary to make full use of Dynamic Power Capping.
» iLO Advanced license.
» Insight Power Manager.

[djboris]

Hello

Thanks for you reply. I will read the documents ASAP.

It's a G7 with a iLO Advanced license.

  Boris

[Sungam]

If the DL120 G7 have iLO 3 Advanced License installed the Dynamic Power Capping Support will enable?

[mysy]

» Insight Power Manager. 

how to install this item? 

my ml110 g9 use replace motherboard.