ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML110: The Power Manager is unavailable for this configuration

 
djboris
Occasional Visitor

ML110: The Power Manager is unavailable for this configuration

Hello

 

I have a ProLiant ML110 server with iLO 1.26 (last version). When I go to the "Power Meter" in iLO, I see this message: "The Power Manager is unavailable for this configuration.". I tried to change the Power Settings (it displays: "Power Cap is not supported"), but it didn't helped.

 

How can I display the "Power Meter"?

 

Thanks

 

Kind Regards


Boris

3 REPLIES
Suman_1978
HPE Pro

Re: ML110: The Power Manager is unavailable for this configuration

Hi,

 

What is the generation of this ML110?

 

http://h18004.www1.hp.com/products/servers/management/dynamic-power-capping/support.html

Dynamic Power Capping is supported on all BL/DL/ML G7 or later servers with the exception of the ML110 G7, and DL120 G7. All G7 or later servers ship with the minimum required firmware to enable Dynamic Power Capping Support.

 

Also please note the following:

http://h18004.www1.hp.com/products/servers/management/dynamic-power-capping/faq.html

For HP ProLiant servers, the following components are necessary to make full use of Dynamic Power Capping.
» iLO Advanced license.
» Insight Power Manager.

 

djboris
Occasional Visitor

Re: ML110: The Power Manager is unavailable for this configuration

Hello

 

Thanks for you reply. I will read the documents ASAP.

 

It's a G7 with a iLO Advanced license.

 

  Boris

Sungam
Advisor

Re: ML110: The Power Manager is unavailable for this configuration

If the DL120 G7 have iLO 3 Advanced License installed the Dynamic Power Capping Support will enable?