HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML110 onboard sata raid trying to install SBS2k3 no floppy

 
Martin Schulyz
Occasional Contributor

ML110 onboard sata raid trying to install SBS2k3 no floppy

I have a brand new HP ML110 with no floppy.

I copied the onboard sata device drivers to a USB memory stick and managed to get the SBS 2k3 install to recognise and use the additional drivers when I hit F6.

The next problem appears after formatting the partition when it asks again to "Insert the disk labelled: Adapter SATA Driver v1.00 (Windows 32 bit for 2000/XP/2003) into drive A:" and there is no drive A: as the USB stick appears as D:.


Any ideas how to get around this problem OR do I need to purchase the HP USB FDD?

Thanks

Martin
2 REPLIES
Igor Karasik
Honored Contributor

Re: ML110 onboard sata raid trying to install SBS2k3 no floppy

Martin Schulyz
Occasional Contributor

Re: ML110 onboard sata raid trying to install SBS2k3 no floppy