ML110G3 Memory upgrade

[David Franken]

Hi All,

I have an old ML110 G3 wich i want to upgrade the memory of to the max of 8GB.

Quickspecs of the ML110 G3 dictates i have to use the DDR2 PC-4200 ECC memory.

So i went to the Kingston Memory Configurator and it said i need the KTH-XW4200A/2G 2GB 533MHz ECC Module.

Now the problem is that these modules are a little bit expensive (about 40 Euro's).

Now i found an alternative; the KVR533D2E4/2G or the KVR533D2E4K2/2G.

Does anybody know if these also work in the ML110 G3 server?
Or has anybody experience with an another brand of memory in this server?

Thank you in advance!

Greets,
David

[Ali · Accepted solution]

Hi David,

I would suggest to go for HP memory only
393354-B21 (2048 MB Unbuffered Advanced ECC PC2-4200 DDR2 (1 x 2048 MB), Dual Rank )

You will not get support from HP on third party memory and you may experiecne some performance issue.

Check the server quickspecs for configuration option.

thanks,
Aftab

[Michael A. McKenney]

Axiom memory will work. Use the HP part number dash AX to find it. Axiom makes most of HPs memory modules. I use it in my 64 bit SQL server, 8 x 4 GB = 32GB. No issues. Axiom has next day replacement. Usually with HP, its next day to get memory anyways under Carepaqs. I would not use Kingston.

[David Franken]

Hi All,

I checked the partnumber, but it is not available anymore.

So i checked the AXIOM memory, but it is not so easily available in the Netherlands.

I checked the KTH-XS4200A/2G modules, and it is a supported alternative.

I ordered them yesterday. I will let you know it worked.