ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

ML110G7 and B110i controller

Klaus Schiffgens
Occasional Advisor

ML110G7 and B110i controller

After a crash of our backup server which is a ML110G7 with integrated B110 array controller attached to 2 x SATA 160 GB drives in RAID level 1, we are unable to boot from disk running W2K8R2. So we tried to do a new OS setup, but failed when installing it to disks. OS doesn't see devices, whereas a Linux boot with G-PARTED shows the disks as expected.

We tried to integrate device drivers from website via iLO mounted iso device during installation but it fails. Is it possible controller is damaged allthough option rom shows the disks and recognizes raid and logical drive?

 Regards, Klaus