ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML115 G5 Installation Hang

 
Craig Gallagher
Occasional Visitor

ML115 G5 Installation Hang

Hello,
I'm just recently got a ML115 G5 and have setup the RAID on the device. However when I tried to install windows the driver could not be found. When I had a similar problem with windows XP, I slipstreamed the windows 2003 server disc and added in the drivers from this website. Now it hangs after the driver loading has completed successfully on the very next install prompt.

I've yet to flash the firmware thats next on my things to do. Any suggestions on how to fix this issue?

Thanks
2 REPLIES
Gary Benavides Meza
Trusted Contributor

Re: ML115 G5 Installation Hang

What kind of storage controller do you have? Is it the embedded SATA controller. Did you check if you are loading or slipstreaming the correct storage controller driver

Embedded SATA driver 2003 x32:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3577708&prodNameId=3577715&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=MTX-295381a9a94e4182a62f7127b5
Craig Gallagher
Occasional Visitor

Re: ML115 G5 Installation Hang

I believe its the embedded storage controller i'm running 2x HP 160gb HDDs

Tried the drivers listed still the same issue. With RAID enabled i get to the Welcome to Setup screen and it just hangs,

Can't Continue, Repair or Quit

with raid disabled i get past that screen but thats not what I want