HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML115 Max SATA Drive Size

 
Bing_4
Occasional Visitor

ML115 Max SATA Drive Size

I know the Quickspecs state that the maximum drive size is 4x500GB but has anybody tried a larger drive (such as 750GB or 1TB)?

Just wanted to know if there is a BIOS/Controller limitation?

With Hard Drives being so cheap I just wanted to cram as much storage into the server as possible.

On a slightly different note - in order to add 4 drives Quickspecs states it is a custom order from HP. Is there anything special which needs to be done in order to support the 4 drives?

Thanks in advance
4 REPLIES
RaMpaNTe
Trusted Contributor

Re: ML115 Max SATA Drive Size

Which 115 are you talking about? There are 2 models the g1 and the g5.
You heve a question... I have an aswer!!!
RaMpaNTe
Trusted Contributor

Re: ML115 Max SATA Drive Size

Well if the server you have is the g1 then the limitation her is the controllers that the server supports. They are low end controllers hence storage capacity are not as good as midle high end controllers.
You heve a question... I have an aswer!!!
Bing_4
Occasional Visitor

Re: ML115 Max SATA Drive Size

Yes its a G1.

Thanks for your reply

Do you know if theres anything you especially need to do to add the 4 drives?

Thanks
RaMpaNTe
Trusted Contributor

Re: ML115 Max SATA Drive Size

Not actually you just need to have the proper cabling configuration.
You heve a question... I have an aswer!!!