ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML150 G1 Logical drives problem

 
Azan
Occasional Contributor

ML150 G1 Logical drives problem

hi,

 

i am facing a problem in my HP ML150 G1 Server with two SCSI Hard drives with RAID 1, creating problem no ligical drives detection.

 

 

Error showing


SCSI IDs are not responding 0 3 4

1 logical drive found on the host adaptor 

1 logical drive failed 

1 logical drive handled by Bios


plz help 

1 REPLY
Suman_1978
HPE Pro

Re: ML150 G1 Logical drives problem

Hi,

 

Start from the basics:

Is the storage controller being detected during POST?

Switch OFF the server, then reseat the Storage cables and controller card if available.

Reset the server by clearing NVRAM from the BIOS or System Maintenance Switch.

 

Remove the existing drives and try with different ones if available, configure them and like this you  will know if the existing drives were actually bad.

 

Thank You!
I am a HP employee.