ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML150 G2 + M110 RAID controller

 
raadek
Honored Contributor

ML150 G2 + M110 RAID controller

Hi,

We have a trouble with creating a RAID 5 array using obvius Ctrl+A combination in ML150 G2 + M110 RAID controller (Adaptec 2120S).

Apparently there is no option to intialise / create new array under Adaptec utility. According to manual

Any clues? Anyone came accross similar trouble?

Rgds
Don't panic! [THGTTG]
3 REPLIES
Jaime Bolanos Rojas.
Honored Contributor

Re: ML150 G2 + M110 RAID controller

Raadek,

Thinking that raid controller is supported in the ml150 g2 ( I have not checked it ), you will have to enable software raid in the "bios" once enable you will have the option to press ctrl-a.

Regards,

Jaime.
Work hard when the need comes out.
raadek
Honored Contributor

Re: ML150 G2 + M110 RAID controller

There is no trouble with getting into Adaptec utility by pressing Ctrl+A though - the problem is there is no option to create the array WITHIN this utlility
Don't panic! [THGTTG]
Jaime Bolanos Rojas.
Honored Contributor

Re: ML150 G2 + M110 RAID controller

Ahh, Then am sure you are running part # 325609-001 for the raid controller.

One thing why that could be happening is a bug in the firmware, I would upgrade to the latest firmware on the server and the controller, then test again.

Regards,

Jaime.
Work hard when the need comes out.