ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML150 G2 Problems...

 
Mikael Bergemalm
Occasional Visitor

ML150 G2 Problems...

Hi,
We're running a voicemailapplication which requires extra serial-ports. We use digiboard's, preferably the 4r-920-pci.
when the card is inserted the post complains about "PnP MemoryConflict"?! I've tried different cards on two different ML150's with the same result. Never had any problems like this before with other proliants/servers.
If i ignore the errormsg and press F1 to "continue" the card seems to work just fine (Redhat ES3). But we can't send machines to customers where you have to run down and press F1 to get it up and running every now and then.

What can be done?
//Micke
2 REPLIES
Oleg Koroz
Honored Contributor

Re: ML150 G2 Problems...

Work on the problem, Firmware, Verify Compatibility, Different card
or
Disable F1 Prompt from BIOS if that Option available for you
Mikael Bergemalm
Occasional Visitor

Re: ML150 G2 Problems...

Yup I could go for the "disable" option if there was one. There isn't on the ML150. :-(