ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML150 G2, broken PCI 64-bit slots?

Jonas O Almquist
Occasional Visitor

ML150 G2, broken PCI 64-bit slots?

Hi!

I have a server that the 4port SATA raid controller broke down on, i replaced the card with a sparepart but the server didn´t find the new card. I have checked all BIOS options and there is nothing to enable. The bios posts "Nothing Installed" on every PCI slot.

If i insert a 32bit NIC in the 32bit slot it shows up, if i put the same card in one of the 64bit slots it says "Not installed"

So my conclusion is that all the 64bit PCI slots are broken.

Does anyone else have any ideas what to do?

Might it be the power supply?`
Mayby systemboard?

Best regards Jonas Almquist
2 REPLIES
Cookie_2
Frequent Advisor

Re: ML150 G2, broken PCI 64-bit slots?

To help you better please let us know the exact model of the HP server and the spare part # of the card.
Sometimes a Loser Wins!!
Jonas O Almquist
Occasional Visitor

Re: ML150 G2, broken PCI 64-bit slots?

The server is a ML150 G2
And the sparepart number for the card is 373013-001 it´s a 4port SATA raidcontroller with Adaptec 8130 chip