ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML150 G3 Configuration Utility for Windows problem

SOLVED
Go to solution
Voldemar
Occasional Advisor

ML150 G3 Configuration Utility for Windows problem

I have a ProLiant ML150 G3 with 3 72GB SAS drives connected to the raid card.
System Windows Server 2003 SP2.

After start HP ProLiant Array Configuration Utility for Windows I receive the message: "ACU did not detect any supported controllers in your system"?

What to do?

7 REPLIES
Mauro Rusignuolo
Trusted Contributor

Re: ML150 G3 Configuration Utility for Windows problem

do you have downloaded the software you are using (ACU)?

which controller are you using? the HBA 1068 SAS /SATA ?

bye.

TJK.
<> Leonardo da Vinci
Voldemar
Occasional Advisor

Re: ML150 G3 Configuration Utility for Windows problem

Software: HP ProLiant Array Configuration Utility for Windows v.7.80.6.0

Controller: SAS3080X-HP.
Mauro Rusignuolo
Trusted Contributor

Re: ML150 G3 Configuration Utility for Windows problem

do you have the right part number of the controller?

ACU, came with the proliant ML150 G3 or you downloaded it by yourself?

because ACU doesn't function, for istance, with the HBA SAS/SATA 1068 installed on ML150 G3 ...

let me know.

bye.

TJK.
<> Leonardo da Vinci
Voldemar
Occasional Advisor

Re: ML150 G3 Configuration Utility for Windows problem

You are right.
It's HBA SAS/SATA 1068.

ACU will not work on this controller?

Mauro Rusignuolo
Trusted Contributor

Re: ML150 G3 Configuration Utility for Windows problem

unfortunately ... no.

bye.

TJK.
<> Leonardo da Vinci
Mauro Rusignuolo
Trusted Contributor
Solution

Re: ML150 G3 Configuration Utility for Windows problem

thank you or the "assigned points"... :-)

bye

TJK
<> Leonardo da Vinci
Mauro Rusignuolo
Trusted Contributor

Re: ML150 G3 Configuration Utility for Windows problem

thank you.

bye.
<> Leonardo da Vinci