ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML150 G3 Install Server 2003 Problem

R Malpas
Occasional Contributor

ML150 G3 Install Server 2003 Problem

I have a ML150 G3 product ID is 438786-011, I have lost the original driver disk and I dont seem to be able to order a new one.

I have loaded the SATA driver that I beleive to be the correct one ( note system does have a LSI board plugged into the back plane where all the drives slot) I can format the drive via Win server setup but once it gets to the installtion step with a time of 39 mins to go, the server locks up fans go to max, screen goes blank and everything stops. If I reboot the server it continues the installtion up till the 39min mark then does the same thing. Can anyone confirm exactly what Storage driver I shoudl be using and anything else that might be causing the problem. Note have a Toshiba floppy with storage driver installed and use this to add the driver at Win Svr initial install process, leave floppy attached with storage disk in.