ML150 G3 Raid controller setup error

[Romance Bamboo]

SAS Raid 0 configuration setup, when install MS Server 2003 with USB floppy support, after F6 then shows floppy drive and after that
error shows;

"File txtsetup.oem caused an expected error (32768) at line 1896 in d:\srvrtm\base\boot\setup\oemdisk.c."

any help pls! tnx

[chongkan]

Replace the floppy disk, you're getting this error due to a corrupted file.

You have to perform a COMPLETE format to the floppy disk before loading the drivers on it.

Hope it helps!

[Romance Bamboo]

I tried but still error msg exists.

Is it possible that the external floppy may have been the problem?

If that would be the cause, what will be the alternative drive to setup the controller?

Thank you very much.

[Rajashekar Chintakunta]

Hi Romance Bamboo,

Create a new setup CD which has the driver integrated. You can use nLite (www.nliteos.com) for this purpose.

Regards,
Raj.

[Romance Bamboo]

How and where should the drivers to be saved inside server 2003 installation cd?

Tnx..

Btw, can i use or add IDE hdd to setup first then update all the drivers?